No products in the cart.
Shera
Display: 
Showing 61–72 of 83 results
Brand: Shera~ 40 x 0.5 mm
~ For all alloys
~ Glass-fibre reinforced
~ Good price to performance ratio
~ 10 Pack~ Max speed ↻ 38,000 RPM
Brand: SheraPolishing beads
~ Made from lead free sodium glass
~ For compressing, smoothing and polishing of metal surfaces
~ Non-abrasive
~ For precious metal, semi and non-precious alloys
~ Carton contains 4 x 5kg bag- Brand: Shera
Polishing beads
~ Made from lead free sodium glass
~ For compressing, smoothing and polishing of metal surfaces
~ Non-abrasive
~ For precious metal, semi and non-precious alloys 
Brand: SheraSilicone lab putty
~ Shore hardness A 85
~ For the preparation of over bites and models for denture repairs
~ For isolating teeth against stone when flasking
~ Soft and non-sticky
~ Very homogeneous and dense
~ Highly dimensionally stable
~ Stable to boiling
~ Mixes easily with hardener SHERAPASTENHÄRTER- Brand: Shera
Silicone lab putty
~ Shore hardness A 85
~ For the preparation of over bites and models for denture repairs
~ For isolating teeth against stone when flasking
~ Soft and non-sticky
~ Very homogeneous and dense
~ Highly dimensionally stable
~ Stable to boiling
~ Mixes easily with hardener SHERAPASTENHÄRTER 
Brand: SheraSuper hard stone, superior quality:
~ For implant work, sectioned and master model
~ Good thixotrope quality and very good flow characteristic
~ Can be scanned with several systems
~ Ideal for plastic basing systems
~ Extreme easy processingTechnical specification
mixing ratio (powder : distilled water) 100 : 20 hardness after 2 h (MPa; N/mm2) 300 hardness after 24 h (MPa; N/mm2) 320 compressive strength after 1 h (MPa; N/mm2) 70 compressive strength after 1 h (psi) 10,150 setting expansion after 2 h (%) < 0.10 working time (min) 5.0 – 6.0 end of setting (min) approx. 30 
Brand: Shera~ 20 x 0.25 mm
~ For ceramic
~ Glass-fibre reinforced
~ High cutting performance
~ 10 Pack~ Max speed ↻ 50,000 RPM
Brand: SheraSuper hard stones for especially high demands
~ For implant works, for sectioned, master and static models
~ Good thixotrope quality and very good flow characteristics
~ Can be scanned with several systems
~ Ideal for plastic basing systems
~ Exceptional hardnessTechnical specification
mixing ratio (powder : distilled water) 100 : 20 hardness after 2 h (MPa; N/mm2) 310 hardness after 24 h (MPa; N/mm2) 340 compressive strength after 1 h (MPa; N/mm2) 64 compressive strength after 1 h (psi) 9,280 setting expansion after 2 h (%) 0.10 working time (min) 6.0 – 7.0 end of setting (min) approx. 30 
Brand: SheraFibre reinforced
~ 22 x 0.3 mm
~ For non-precious metal, gold and ceramic
~ Very flexible
~ Extreme long service life
~ 20 Pack~ Max speed ↻ 35,000 RPM
Brand: SheraDuplicating silicone
~ Colour: blue
~ Shore hardness A 17
~ Soft and elastic
~ Setting time: 20 minutes
~ Even for models with undercut thin dies
~ Yields to the expansion of the investment- Brand: Shera
Duplicating silicone
~ Colour: blue
~ Shore hardness A 17
~ Soft and elastic
~ Setting time: 20 minutes
~ Even for models with undercut thin dies
~ Yields to the expansion of the investment
