Disc
Showing 1–12 of 23 results
-
Brand: DentaurumDentaurum Rematitan, Ti5 Milling Blank
- For high demands.
- Titanium alloy (Ti Al 6 V4) with increased mechanical hardness.
- Particularly suitable for long-span, delicate framework structures and for implant work
Product sizes available
10mm, 12mm, 15mm, 20mm, 25mm, 30mm
Product advantages:
- High mechanical strength.
- High biocompatibility in implant quality.
- Ideal for ceramic veneering using bonding ceramics suitable for titanium such as ceraMotion® Ti.
- High degree of corrosion resistance.
-
Brand: Hatho
Flexible, made from soft polyamide interspersed with trimming and polishing agents. The brush design of the thin discs combined with the finely harmonised polishing agents make these colour-coded discs suitable for a wide range of applications. For the polishing of precious alloys, partial denture alloys, denture resins, permanently soft and thermoplastic resins, orthodontic resins etc. without polishing paste.
-
Brand: Hatho
Flexible, made from soft polyamide interspersed with trimming and polishing agents. The brush design of the thin discs combined with the finely harmonised polishing agents make these colour-coded discs suitable for a wide range of applications. For the polishing of precious alloys, partial denture alloys, denture resins, permanently soft and thermoplastic resins, orthodontic resins etc. without polishing paste.
-
Brand: Hatho
Flexible, made from soft polyamide interspersed with trimming and polishing agents. The brush design of the thin discs combined with the finely harmonised polishing agents make these colour-coded discs suitable for a wide range of applications. For the polishing of precious alloys, partial denture alloys, denture resins, permanently soft and thermoplastic resins, orthodontic resins etc. without polishing paste.
-
Brand: EisenbacherNPM Cobalt-based dental milling alloy for metal-ceramic, type 4, with step / shoulder
- Optimised milling properties due to special heat treatment
- High strength due to homogeneous metal structure
- Suitable for all high fusing veneering ceramics
Indications:
- Crowns and bridges for metal-ceramics
- Superstructures and bars
Technical Parameters:
- Yield Strength MPa – 440
- Elongation (%) – 14
- GPa – 210
- Tensile Strength – 819
- Density (g/cm3) – 8.55
- Hardness (HV 10/30) – 275
-
Brand: EisenbacherTitan based dental milling alloy for metal-ceramics, with step / shoulder.
- Clinical approved titanium alloy with high strength
- Very good milling properties
- Suitable for veneering with Ti-ceramics
Indications:
- Crowns and bridges for metal-ceramics
- Superstructures and bars
Technical Properties:
- Yield Strength (MPa) – 816
- Elongation (%) – 15
- Youngs Modul (GPa) – 115
- Tensile Strength (MPa) – 885
- Density (g/cm3) – 4.4
- Hardness (HV 10/30) – 318
-
Brand: SunshineFlexible sintered disc. For using with ceramics, gold and chrome. Ideal for cutting off Emax sprues. Long lasting.
