Shera

SHERADUBLE is an agar-agar duplicating material for all plaster-free investments.

The agar-agar duplicating material is distinguished by a long life span and exact moulding.

Adaptive for both conventional heating in duplicating devices as well as heating in microwaves.

Green in colour with an excellent price-performance ratio.

Cobalt-based dental casting alloy

– Chrome – 28%

– Cobalt – 64%

– Molybdenum – 6%

– Elements below 1% – C, Fe, Si, Mn, N

– for combination work and clasp dentures

– Laserable

– Type 5 alloy

– Class IIa medical device

Technical Information

Vickers Hardness (HV 1)     –     360

Density                                    –     8.2g/cm3

Tensile Strength                    –     800 MPa

Elongation at break A5        –     5%

Elastic Modulus                    –     220 GPa

Solidus Point                         –     1,270 degrees C

Liquidus Point                      –     1,400 degrees C

Pouring Temperature         –     1,500 degrees C

– Good visual control over isolated area
– Saves time and material
– Water soluble, easy to clean off
– Protects models from occlu-pigments

Light-curing 3D printing resin. Flexible pink resin designed to simulate soft tissue. Perfect for implant models and gingival masks. Perfect for aesthetically
demanding work.

– for the production of gingiva masks
– for aesthetically appealing works
– easy to grind
– material that stays soft

Layer strength – 100μm

Wavelength – 385  & 405 nm

Shera 3D Printing Parameters Available HERE

Ultra-precise, low-reflection models ideal for crown & bridge, diagnostics, and aligners. Crisp margins and realistic textures make this a lab favourite.

– for the fabrication of high-precision die models
for crowns, bridges, veneers and inlays
– for model casting, splint and aligner models
– for implant models as well as for situation, wax-up
and mock-up models
– sharp textures
– vivid contours
– scannable surface
– TPO free

Resin Colour                     Layer strength                   Wave Length

Desert                                 50μm & 100μm                 385 & 405 nm

Stone                                   50μm & 100μm                385 & 405 nm

Smoky White                     50μm & 100μm                385 & 405 nm

Aesthetic Red                    50μm                                  385 & 405 nm

Shera 3D Printing Parameters Available HERE

Ultra-precise, low-reflection models ideal for crown & bridge, diagnostics, and aligners. Crisp margins and realistic textures make this a lab favourite.

– for the fabrication of high-precision die models
for crowns, bridges, veneers and inlays
– for model casting, splint and aligner models
– for implant models as well as for situation, wax-up
and mock-up models
– sharp textures
– vivid contours
– scannable surface
– TPO free

Resin Colour                     Layer strength                   Wave Length

Desert                                 50μm & 100μm                 385 & 405 nm

Stone                                   50μm & 100μm                385 & 405 nm

Smoky White                     50μm & 100μm                385 & 405 nm

Aesthetic Red                    50μm                                  385 & 405 nm

Shera 3D Printing Parameters Available HERE

Ultra-precise, low-reflection models ideal for crown & bridge, diagnostics, and aligners. Crisp margins and realistic textures make this a lab favourite.

– for the fabrication of high-precision die models
for crowns, bridges, veneers and inlays
– for model casting, splint and aligner models
– for implant models as well as for situation, wax-up
and mock-up models
– sharp textures
– vivid contours
– scannable surface
– TPO free

Resin Colour                     Layer strength                   Wave Length

Desert                                 50μm & 100μm                 385 & 405 nm

Stone                                   50μm & 100μm                385 & 405 nm

Smoky White                     50μm & 100μm                385 & 405 nm

Aesthetic Red                    50μm                                  385 & 405 nm

Shera 3D Printing Parameters Available HERE

For the production of base parts for orthodontic appliances, surgical guides and X-ray templates. Validated for autoclave sterilization according to EN ISO 17664. Very high mechanical stability

– medical device class IIa
– MMA-free, tasteless

Colour – Clear

Wavelength – 385 nm

Shera 3D Printing Parameters Available HERE

Choose FLEX for comfort and elasticity.

Both Taff and Flex deliver a smooth polish and exceptional fit. For splints, repositioners, mouth and nightguards. Extremley impact-resistant, flexible and break-proof. Easy to polish, odourless and tasteless.

– MMA-, THF-MA- and TPO-free
– medical device of class IIa

Colour – Clear

Wavelength – 385 nm

Shera 3D Printing Parameters Available HERE