Stone
Showing all 7 results
-
Brand: SheraSHERAfavorit superhard plaster cast type 4
Resin reinforced super hard stone – Tooth coloured
for hard impression materials, easy to remove and excellent for pouring out fine preparations or undercuts
Recommended for:
- Sectioned models
- Master models
- Model casting works
- Opposing models
- Static models
Hardness after 2hrs – 300MPa
Hardness after 24hrs – 320MPa
Compressive strength after 1hr – 57MPa, 8,265psi
Setting expansion after 2hr (%) – 0.1%
Working time – 6-7mins
End of setting time – approx 30mins
Multi-buy discount available – buy 4 and get 20% discount
-
Brand: SheraUltra-precise, low-reflection models ideal for crown & bridge, diagnostics, and aligners. Crisp margins and realistic textures make this a lab favourite.
– for the fabrication of high-precision die models
for crowns, bridges, veneers and inlays
– for model casting, splint and aligner models
– for implant models as well as for situation, wax-up
and mock-up models
– sharp textures
– vivid contours
– scannable surface
– TPO freeResin Colour Layer strength Wave Length
Desert 50μm & 100μm 385 & 405 nm
Stone 50μm & 100μm 385 & 405 nm
Smoky White 50μm & 100μm 385 & 405 nm
Aesthetic Red 50μm 385 & 405 nm
Shera 3D Printing Parameters Available HERE
-
Brand: SheraUltra-precise, low-reflection models ideal for crown & bridge, diagnostics, and aligners. Crisp margins and realistic textures make this a lab favourite.
– for the fabrication of high-precision die models
for crowns, bridges, veneers and inlays
– for model casting, splint and aligner models
– for implant models as well as for situation, wax-up
and mock-up models
– sharp textures
– vivid contours
– scannable surface
– TPO freeResin Colour Layer strength Wave Length
Desert 50μm & 100μm 385 & 405 nm
Stone 50μm & 100μm 385 & 405 nm
Smoky White 50μm & 100μm 385 & 405 nm
Aesthetic Red 50μm 385 & 405 nm
Shera 3D Printing Parameters Available HERE
-
Brand: SheraUltra-precise, low-reflection models ideal for crown & bridge, diagnostics, and aligners. Crisp margins and realistic textures make this a lab favourite.
– for the fabrication of high-precision die models
for crowns, bridges, veneers and inlays
– for model casting, splint and aligner models
– for implant models as well as for situation, wax-up
and mock-up models
– sharp textures
– vivid contours
– scannable surface
– TPO freeResin Colour Layer strength Wave Length
Desert 50μm & 100μm 385 & 405 nm
Stone 50μm & 100μm 385 & 405 nm
Smoky White 50μm & 100μm 385 & 405 nm
Aesthetic Red 50μm 385 & 405 nm
Shera 3D Printing Parameters Available HERE
-
Brand: SheraUltra-precise, low-reflection models ideal for crown & bridge, diagnostics, and aligners. Crisp margins and realistic textures make this a lab favourite.
– for the fabrication of high-precision die models
for crowns, bridges, veneers and inlays
– for model casting, splint and aligner models
– for implant models as well as for situation, wax-up
and mock-up models
– sharp textures
– vivid contours
– scannable surface
– TPO freeResin Colour Layer strength Wave Length
Desert 50μm & 100μm 385 & 405 nm
Stone 50μm & 100μm 385 & 405 nm
Smoky White 50μm & 100μm 385 & 405 nm
Aesthetic Red 50μm 385 & 405 nm
Shera 3D Printing Parameters Available HERE
-
Brand: SheraHard stone
~ orthodontic stone
~ snow-white
~ very dense, homogenous and creamy consistency
~ for bubble free models
-
Brand: SheraSHERASON 928
~ removes stone and plaster residues from dentures or spatulas
~ can be diluted 1:2 with water
~ appropriate for ultrasonic bath