Shop
Showing 61–72 of 556 results
-
Brand: SheraSuper hard stone, superior quality:
~ For implant work, sectioned and master model
~ Good thixotrope quality and very good flow characteristic
~ Can be scanned with several systems
~ Ideal for plastic basing systems
~ Extreme easy processingTechnical specification
mixing ratio (powder : distilled water) 100 : 20 hardness after 2 h (MPa; N/mm2) 300 hardness after 24 h (MPa; N/mm2) 320 compressive strength after 1 h (MPa; N/mm2) 70 compressive strength after 1 h (psi) 10,150 setting expansion after 2 h (%) < 0.10 working time (min) 5.0 – 6.0 end of setting (min) approx. 30 -
Brand: SheraSuper hard stones for especially high demands
~ For implant works, for sectioned, master and static models
~ Good thixotrope quality and very good flow characteristics
~ Can be scanned with several systems
~ Ideal for plastic basing systems
~ Exceptional hardnessTechnical specification
mixing ratio (powder : distilled water) 100 : 20 hardness after 2 h (MPa; N/mm2) 310 hardness after 24 h (MPa; N/mm2) 340 compressive strength after 1 h (MPa; N/mm2) 64 compressive strength after 1 h (psi) 9,280 setting expansion after 2 h (%) 0.10 working time (min) 6.0 – 7.0 end of setting (min) approx. 30 -
Brand: SheraLight-curing 3D printing resin. Flexible pink resin designed to simulate soft tissue. Perfect for implant models and gingival masks. Perfect for aesthetically
demanding work.– for the production of gingiva masks
– for aesthetically appealing works
– easy to grind
– material that stays softLayer strength – 100μm
Wavelength – 385 & 405 nm
Shera 3D Printing Parameters Available HERE
-
Brand: EisenbacherTitan based dental milling alloy for metal-ceramics, with step / shoulder.
- Clinical approved titanium alloy with high strength
- Very good milling properties
- Suitable for veneering with Ti-ceramics
Indications:
- Crowns and bridges for metal-ceramics
- Superstructures and bars
Technical Properties:
- Yield Strength (MPa) – 816
- Elongation (%) – 15
- Youngs Modul (GPa) – 115
- Tensile Strength (MPa) – 885
- Density (g/cm3) – 4.4
- Hardness (HV 10/30) – 318
-
Brand: SheraSilicone putty
~ Shore hardness A 95
~ For the preparation of over bites as well as bite registrations and for models for denture repairs
~ Slightly oily
~ Very exact moulding
~ Dimensional stability
~ Stable to boiling -
Brand: SheraSandblasting Material
~ 99.7% aluminium oxide
~ Colour: White
~ For precious metal or ceramic
~ Carton contains 4 x 5kg bagSHERA abrasives are of the highest quality and degree of purity possible. The hygroscopic abrasives are packed in 5kg bags for protection against moisture.
-
Brand: Shera
Sandblasting Material
~ 99.7% aluminium oxide
~ Colour: White
~ For precious or non-precious-metal
~ Carton contains 4 x 5kg bagSHERA abrasives are of the highest quality and degree of purity possible. The hygroscopic abrasives are packed in 5kg bags for protection against moisture.
-
Brand: Shera
Sandblasting Material
~ 99.7% aluminium oxide
~ Colour: White
~ For chrome castings
~ Carton contains 4 x 5kg bagSHERA abrasives are of the highest quality and degree of purity possible. The hygroscopic abrasives are packed in 5kg bags for protection against moisture.
-
Brand: EveSilicone polisher for denture and orthodontic acrylics.
~ Medium grit for smoothing
~ #H338KM
~ 100 Pack
